ELECTRO-OPTICAL PRODUCTS CORPORATION
	62-40 Forest Avenue, 2nd Floor • Ridgewood, NY 11385, USA • Tel: 718-456-6000 • Fax: 718-456-6050 • www.eopc.com

DSH-10 Driver

		DSH-10 Driver DESCRIPTION

FEATURES AND ADVANTAGES Designed specially for SH-10 Laser Safety (Interlock) Shutter Set to "close" or "open" postion For a line voltage of 110Vac or 220Vac Low cost Small size External TTL input Set to "close" or "open" postion Present timer available BNC connector optional Stock item

	home optical modulators / choppers / shutters tuning fork (fixed frequency) choppers variable frequency choppers choppers / shutters rotating wheel (variable frequency) choppers optical chopping / modulating systems optical chopping systems locked to ext. clock optical chopping systems locked in master/slave mode optical SAFETY shutters laser safety (interlock) shutters X-Ray (interlock) shutters optical shutters, choppers and filters optical shutters / choppers optical choppers / shutters filter selectors optical scanners and deflectors resonant (fixed frequency) scanners beam deflectors optical scanning / deflecting systems - optical scanners locked to an external clock signal - optical scanning systems to generate a circle or an ellipse or to lock optical scanners in phase or out of phase - optical scanning systems to generate a Raster Scan or Lissajous Patterns - X,Y raster scanning systems - 2-axis deflectors drivers ED Driver AGC Driver PLD-1C Driver PLD-1S Driver PLD-2C Driver PLD-2S Driver PLD-2SXY Driver PLD-XYG Driver DCH-40 Driver DCH-50 Driver DCH-60 Driver DSH-10 Driver DSH-20 Driver DSH-35 Driver DSH-65 Driver other products Filter selectors Rotating Wheel Optical Choppers photo diode amplifiers o/e and e/o converters fiber optic multiplexers fiber optic video links laser vibrometers Photodiode Transimpedance Amplifier Analog / digital fiber links Optical time domain reflectometers Optical spectrum detectors Tuneable laser sources Variable optical attenuators Loss test sets Fiber optic power meters Light sources Visual fault locators Video probes Fiber identifiers Data Sheets contact us careers

The following driver models that enable the user to control the shutter with a TTL signal are available:
DSH-10-110 or DSH-10-220, a cased driver 5.3" x 5.3" x 2" operating from a line voltage of 110Vac or 220Vac (please specify DSH-10-110 or DSH-10-220).
DSH-10-110/220, a cased driver 5.3" x 5.3" x 2" with a selector switch for operating from a line voltage of 110Vac or 220Vac.
DSH-10-110-BNC or DSH-10-220-BNC, a cased driver 5.3" x 5.3" x 2" operating from a line voltage of 110Vac or 220Vac (please specify DSH-10-110 or DSH-10-220) with a BNC connector for TTL input.
The DSH-10-5-PC, this is a low cost PC board level driver for the SH-10-5 shutter that needs 5Vdc and 12Vdc (200mA).
The DSH-10-TIMER-S, this driver is equipped with a preset timer to open the laser safety shutter for a specific time from the range of 0.1sec to 10 minutes.
The DSH-10-TIMER-L, this driver is equipped with a preset timer to open the laser safety shutter for a specific time from the range of 0.1min to 10 hours.
The DSH-20-110 can driver two SH-10 shutters simultaneously.

INSTRUCTIONS TO OPERATE THE DSH-10 DRIVER

THE DSH-10-5-PC DRIVER

THE DSH-10-TIMER-S DRIVER

ORDERING INFORMATION: